There are a variety of reasons you may want to learn how to fix a key stuck in a lock.
Perhaps you’ve lost the key and the lock is a great entry points for burglars. Maybe you’re the owner of an apartment and have just expelled a tenant from the premises and require the door to be locked until you can replace your lock.
Sometimes the wrong person ends in possession of a key and you’re liable for the consequences until you’re able to switch the lock. You can deactivate or remove the lock in a way that makes it permanent locked instead of being unlocked. What do you do to accomplish that?
There are many ways to destroy a lock if you’re desperate. Make sure you purchase a new lock in the event you need to return to it. Only permanently disable the lock only if you’re prepared to do this or if you’re planning on not using it again. At Oklahoma City Locksmith Order you can find the best High Security Door Lock Repair Services, which are quick and professional. Oklahoma City Locksmith Order is available any time of the day to fix broken security locks for you.
Keep in mind that a properly functioning door is vital for fire safety, so be sure that the door isn’t leading into a location that may contain people before you can get your locks repaired.
Here’s how you can get keys stuck inside locks or become disabled:
- Products
- Jam The Lock
- Liquids
- Make a Mess With The Lock
- Mess With The Door
Products
There are tools that will disarm a lock indefinitely or for a time. If you’re trying to figure out how to make a key stuck inside a lock, these are the best solutions. They can be used by anyone to find out how to fix a key in a lock very easily.
1. Key to Lockout
The most well-known is an entry key. These are essentially just key blanks that have been cut horizontally across the middle. Insert it into the hole and then pull out the top part. The bottom half is caught within the locks. To free the bottom part, insert the top half and pull the two pieces out simultaneously.
This product is probably the most used method people can get an unlocked key into a lock. However, the issue is that anything that is inserted into the top of the lock will pull the bottom of the lock out. You can use a clip or Bobby pin. Of course, most people don’t realize this, and the person you’re keeping out may be unaware of this, but it’s worth keeping in your mind.
2. Keyhole Lock
There are keyhole locks that are available online or in local home supply stores. They block the keyway and you’ll require a secondary key to open and take them off. This won’t do much to stop an aggressive lockpicker However, it’s a way to stop someone who has the key from using it.
3. Kill Key
Then, you can purchase the “kill key.” These are keys that you purposely cut off within the lock. They’re intended to be difficult to remove using a broken key extractor. The only way to remove them is to take everything apart. But with some effort it’s possible to make them can be easily removed.
Jamming The Lock
The act of putting anything in the lock will cause it to be jammed in a way that’s generally only reversible when you take off the lock. If you’re going to get the lock replaced regardless, you can easily clog it with anything that’ll fit. You don’t necessarily need to know how to get the lock key stuck inside a lock. If you are facing difficulties, you can hire Oklahoma City Locksmith Order who offers Professional And Affordable Servicesto clients in Oklahoma City who require Change Door Lock Oklahoma City. Here are a few alternatives to choose from.
1. Toothpicks
Toothpicks are good as they can be inserted inside the lock and cut them out of. Based on the size, you can try it with just one toothpick or many of them. Once inside, you’ll be in a position to break them off on the outside, making them much harder to remove.
If you don’t want your toothpick being able to be extracted You can also attempt to break off a tiny piece of a toothpick , and using a different toothpick to push it into the back of the lock. By doing this, you can stop the key from fitting and the user might not even know why.
2. Paper
Paper is another material that can be inserted into the lock without being very extractable. You can cut off tiny strips or fold up a larger piece of paper. Use the key, or something thin and small, like a toothpick, paper clip or bobby pin, to insert the paper into the back of the lock and jam it up.
3. Cut Off The Key
If you have a duplicate of the genuine key, you can also cut the top off. This way, the tip is likely to get stuck inside. This may require quite a bit of effort however, and there are alternatives to this. This is effective for those looking to find out how to get keys stuck inside the lock, however.
Liquids
There are sprays that you can apply to your keyholes to jam it up completely without having learn how to get a key stuck in a lock. Like all things else, you’ll need an upgrade to your lock after you’ve used any of them.
1. Caulk
One obvious option is caulk, which can fill holes. After filling your keyhole using caulk, you’ll probably want to scrape the remaining caulk off using a putty knife to make sure it doesn’t begin dripping everywhere. Use the usual caulk procedure for this – it’s just like from caulking any other hole.
2. Spray Foam
Another product that can be used to fill holes is spray foam. It’s just like spraying foam into an open keyhole, and then you are unable to use keys inside for the rest of your life. It’s as easy as. Include a key and you’ll also have a successful method to experiment with for those who want to learn how to make a key stuck inside a lock.
3. Glue
With this option, you can approach it in several different ways. You can make use of a hot glue gun make a keyhole, or you can be more discreet. It is possible to coat a paperclip with glue, then brush it onto the inside of the lock towards the top. By doing this, you will be able to glue all of the pins to place and ensure that the key is useless.
The other option is to simply glue the key inside. This method is likely what you thought of when wondering how to get a key stuck in the lock.
Any glue is acceptable though stronger ones are a better idea. Gorilla glue or Super Glue will do the trick even if you don’t own an electric high-temperature hot glue machine.
Doing a jig with the Lock
There are methods to destroy or harm the locking mechanism already present within the lock or key to prevent any unlocking. For certain locks options, you’ll need able to unscrew it and gain access to some of the deeper locking mechanisms. There aren’t all locks that require that expertise, however. Here are a few easy strategies you can employ to destroy the lock.
1. Recut Key
If you’re the owner of all of the keys and believe the person you’re fighting may steal one You can cut the key to block the lock from working. You only need a deeper groove in the existing cuts to have it stop interacting with the pins correctly. This cut doesn’t need to be too deep, only an apparent incline.
There’s no need to learn how to avoid getting a key stuck in a lock if you could damage the key itself.
2. Tape The Knob
In order to stop people from opening doors might be as simple as gluing or taping the knob that is used to lock the door. If the knob won’t turn, the key can’t either, and whoever tries to open the door will get stuck.
If using tape, ensure you buy a good duct tape and wrap the entire knob in order to make sure no movement can be made. It’s probably best to purchase a high-quality glue for this and glue the knob around to prevent it from turning. The best option is to test both at once.
As you are able to see, glue is an excellent tool for many things. For instance, for instance, if you’re interested in knowing how to prevent a key from getting stuck in a lock, stop the mechanism from turning, or jam the lock, put on some glue.
3. Cut The Spindle
A specific part of the inside of the lock will allow the door to function. When you take apart the handle, make sure you find a hollow spindle that is connected to the lever. If you remove or cut this spindle, your handle will not be able to interact with the locking mechanism, preventing it from working at all.
For cutting this metal piece it requires an iron cutter. If you plan on removing it without cutting then you’ll have to take apart most of the lock to put it back in place. In order to do this in a proper manner, you’ll need to know the different parts of a lock and how to join them.
Adjust the Door
If you’re not keen to open the locks, there are options to alter the door in order to prevent the door from opening. There are a variety of mechanisms that help the door swing open and operate properly including hinges, as well as the strike plate, so all you have to do is alter or block these mechanisms to stop the door from opening.
1. Rod In Track
You could place rods or any other blockage in the door track. It will prevent the door from opening. A rod that is long is the most effective thing because the door will push it along the track and it will get stuck in a short time. It is not necessary to know how to avoid getting a key stuck in a lock if you can make something or something else stuck in the way.
2. 2×4 To Jamb
If you’re planning to secure the door that slides then all you need to do is place an extra 2×4 on the jamb of the door to prevent it from sliding. You can also use any other large or large object to keep it from sliding, and then you’ll have a stuck sliding door. You can block the door easily by blocking the jamb. Once again, you don’t necessarily have to know how to make a keys stuck in a lock.