Why Is My Push Button Door Lock Not Working?

When a push button door lock is not working it is possible to rule out specific causes simply by learning more about your lock. If you’ve said, “My lock button won’t work,” you can know what you can do to fix the problem. But before you start troubleshooting ensure that you have study the issue thoroughly.

The most common reasons for a push-button door lock to not work are:

  1. Energy
  2. The Lock
  3. Programming
  4. The Door

Types of Push Button Locks

The reason for why your push button door lock isn’t functioning can be related to the type of lock. How a lock is designed to function can tell you when it may fail. When a button for the door locks is not working, you have to understand what might be going wrong in order to determine what’s the issue.

Electronic Push Button Locks

Most modern push button locks make use of some type of electric current, whether it is provided by a battery or hardwired into the building’s electrical. The locks are made up of mechanical and electrical components that can cause a lock button not working.

While electronic locks are available in many styles, most are equipped with a push button or keypad function. There may be a single door lock button not working, or perhaps several are non-responsive. This can cause it to be impossible to open the lock or restrict the functionality of the lock.

Mechanical Push Button Lock

Similar in appearance to its electronic counterpart that is electronic, a mechanical push button lock can have a variety of housings with buttons that are engraved with an inscription or a number. It is the primary difference that a fully mechanical lock operates without electricity.

When you input the proper numeral or alphabetical sequence, pins move in the same way as an ordinary pin tumbler lock. The moving parts provide more chances for something to be broken. Complexity in mechanical systems leads to an even more difficult determination of the reason your door lock’s push button is not functioning.

Privacy Push Button Lock

If someone is talking about a push button door lock that’s not working properly, they are looking to open a bathroom door. In this case the lock isn’t made to be secure. Instead, this simple lock is designed to be used on doors for interior use to show the need for privacy. At Oklahoma City Locksmith Order you can find the best High Security Door Lock Repair Services, which are quick and professional. Oklahoma City Locksmith Order is available any time of the day to fix broken security locks for you.

The privacy button locks is mechanically a push button lock however it’s an esthetic version that it requires its own category. These locks are usually cost-effective, so if you find the door lock with a privacy button malfunctioning, it’s typically best to just purchase the new model.

1. Energy Interruption

The Problem

A door lock that has a push button malfunctioning could be the result of an interruption in energy. This is common for electronic locks, but does not affect any mechanical locks. If your lock is powered by batteries or is hardwired into an building, the electric current can fail or be interrupted.

Battery failure is probably the most frequent reason for an electronic door lock with a push button not functioning. If there’s no power failure that affects your security, electronic locks that are hardwired will not fail. The wires could fray, or the electronic components can fail, but this can be covered in the damage section.

The Solution

Begin by replacing the batteries on the lock. When the port for batteries is on the interior side of the door and you are locked out, there must still be an emergency port for connecting batteries. The emergency port is usually located under a dust cover. It will require a 9V power source to provide a temporary charge.

Similar to a car key not working following changing the battery but this isn’t likely to resolve your issue. The power interruption could be caused by something more substantial. If you are sure of the connections and switch batteries, and the door lock with a push button isn’t working, proceed to the lock damage section.

2. Lock Repair

The Problem

Push button locks can break in a variety of ways. There is no guarantee that a particular lock button that isn’t working, a handle not turning or a door latch that is stuck and so on. Something needs to be fixed or replaced. What you need is a diagnosis of what specifically is going on.

If you are using electronic locks you can employ a voltmeter for checking for damaged wires or parts. For mechanical malfunctions that are not mechanical, the lock could be dismantled and inspected for visible broken, rusted, and damaged parts. Anything out of the ordinary might be responsible for an unresponsive door lock. not functioning.

The Solution

I hope that the reason for the door lock with a push button not working can be traced to one replaceable part. For example an electronic push button lock could have issues due to one of the actuators. A wire might be frayed. Internal components could be corroded or rusted.

Find the problematic part and swap it out, mend it, or clean it as required. If the damage is severe the lock may have to be completely replaced. For further options or assistance in determining the issue, consult the home locksmith or Commercial Locksmith Oklahoma City, depending on the configuration on the lock.

3. Reprogramming

The Problem

Although it might appear like your push button door lock isn’t functioning however, it could actually be functioning perfectly. There’s a good chance that you’re getting an incorrect impression that the lock’s failure because the lock has been reset. This cannot happen with privacy locks.

Reprogramming can happen accidentally when a digital lock is unknowingly moved into its reset mode. The mechanical push-button locks can not be reset accidentally, however, if a different person is in charge of regulating a building’s physical access control and has changed the code, they could have reprogrammed it.

The Solution

The first step is to find out whether anyone is using the latest code. If no one has the code, you must get on the interior side of the door and take the lock out. You should be able to get the door open and remove the lock. Once the lock is removed, you can change the lock combination.

There are override and factory reset options available as soon as the lock is removed. For detailed instructions on how to perform these resets, you will have to consult the manual of the lock. Install your keypad lock again Check to see whether the push button door locks aren’t functioning properly.

4. Door Alignment

The Problem

Even when a push button door lock does not work and appears to be due to the lock, the door could be the cause. Deadbolts and latches could catch upon the plate, and either have trouble unlocking or opening. This catching is often caused by misalignment of the door.

If you have hollow core doors, the base can lift, or the hinges could sag which could make it appear like the door lock that you push isn’t working. For electronic locks that have motorized latch bolts, even a slight disalignment could be enough to cause resistance so the lock won’t be able to open.

The Solution

The most straightforward fix for the push button lock that isn’t working due to alignment is to alter the strike plate of the door. You can move the plate to the right, left and back or forward as needed. If you own an adjustable strike plate, this makes the process simpler.

In addition to the strike plates You can also test on the door hinges. Lock the set screws tight and check if this resolves this issue that causes the door lock with a push button not working. Locksmiths can also pack your hinges to lift and lower your door with out drilling.

Final Thoughts

If you have a push button door lock not working, it might seem like there is no quick fix. But a lock not working could be much easier to fix than you think. If you’re not able to solve your problem in this article, check whether Best Locksmith Oklahoma City services your area.

You might also like

Leave a Reply

Your email address will not be published. Required fields are marked *