If your bathroom has a smell that resembles a sewer It’s time to sniff around for the reason and get it fixed for good.
Have you ever walked into the bathroom and thought, phew! what’s the smell?
Bathrooms should be clean and tidy however, they may create a strong smell. Here are five reasons your bathroom smells like a sewer. what you can do to rid the smell of smell.
Five reasons your bathroom smells like sewer
1. Dry Floor Disposable
A dry floor waste is usually the most common reason that your bathroom smells as the sewer, because it’s permitting the sewer gasses to escape through the hole inside the floor.
This floor drain is just a grated drain that is located in the middle of the bathroom. The grate is easily removed and a torch could be used to inspect the water seal on the bottom of the waste. If you can’t see water at the bottom of the drain then the floor waste is dry and allowing sewer odors to rise to the bathroom.
It’s a simple fix that requires running water down the bath, shower or basin to create the water seal. If water doesn’t appear in the trap’s bottom trap, and you are living in Jumeirah, you’ll need a Emergency Plumber in Jumeirah to find out why.
When the waste on your floor is situated in a bathroom that is used to store things, fill a bucket with water, then pour it onto the grille. Shower wastes also need to be sealed by water which is why you must check the floor waste.
2. Fixed traps are blocked up
There’s a snare under your bathtub, basin, and shower. It can collect solid waste, which is made of soap, toothpaste, and hair. The bacteria that live in the trap can create an unpleasant smell in the bathroom.
There are several ways to address this.
One way is to use a natural cleanser to take away the smell. Another option is to employ an equipment to clean drains for a deep clean. In the case of a basin waste replacement, replace the basin trap, including the plug and waste.
3. Perished rubber seal on toilet pan connector
A toilet trap that is not concealed has a rubber seal on the toilet pan connector. Plumbers call this the pan collar.
Sometimes the seal’s rubber deteriorates with time, allowing sewer gases in the air to leak out. It’s recommended to contact a Toilet Plumbing Jumeirah to fix this issue since they’ll have to replace the seal, which means that the toilet pan must be taken out.
However, if it is hard to remove, the plumber can mould the epoxy sealant (like the ferope) over the rubber to make a seal. In some instances, the entire pan connector could be replaced.
This isn’t as obvious when using hidden toilets. Check the toilet to identify whether the smell is coming from the toilet.
4. Insufficient ventilation
A bathroom that is steamy creates an ideal environment for mould and mildew to develop.
The best way to avoid mould in the plasterboard walls and ceiling is to keep windows open during showers or activating the exhaust fan to suck all the steam.
Mould can also be formed from a gradual water leak within the bathroom walls. It’s best to get an experienced Local Plumbing Company Jumeirah to identify the leak’s source and then fix it so that it doesn’t cause any further growth. This could turn into a health hazard.
5. Toilet partially blocked
A toilet that is blocked will always have a smell. The toilet can be sunk by yourself to unblock the toilet, but when it isn’t working, a plumber will need to be summoned with an appliance to clean the drain to eliminate the blockage.